ND CHECK – 733 Non Aqueous Developer

It is a Non aqueous Developer used in a process of LPI/DPI (Liquid / Dye penetrant inspection). It is ready to use suspension of white developing particles in combination with diluents. It provides a wet, thin, white film which provides and excellent contrasting background for the detection of cracks and discontinuities on the test surface.

Description

AREA OF APPLICATION

Detection of cracks on welds, turbines, reactor vessels, pipes, castings, billets, forging, Aluminum parts, gears, etc.

METHOD OF APPLICATION

After the application of Penetrant and removal of excess penetrant from the surface apply ND Check – 733(developer). Once the film is dry and settled you will have an even thin white film which provides an excellent contrasting background which helps to clearly identify the crakes and discontinuities.

BENEFITS

  • Its non-toxic and Non Corrosive
  • Does not dry immediately allowing better absorbance of penetrant from cracks at even 10-micron level
  • Even spraying pattern and thin film
  • Large coverage area
CHARACTERISTICS TYPICAL VALUES
Appearance Opaque
Color White
Specific Gravity 0.75 ± 0.05
Odor Characteristic
Confirms IS-3658, IS-12889,
ASTM E-165 &
ASME Boiler &
Pressure Vessel
Code Sec V
Packing 500 ml / 235 gm
Toxicity Non-Toxic
Chlorine & Sulphur Less than
500ppm / 0.05%

PACKING: 500ml / 300 gm Eco-friendly Aerosol Sprays

Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

Enquiry

    Follow us

    Get the Newsletter

      Sinetec Technologies
      Tel: 04222446162