SPRAY – 44E – N Galva Coating

Galva Coating
It is a Grey Silverish coating fortified with zinc and other metallic powder for prevention of rust and corrosion which restores the galvanized surfaces to its original finish. It is a fast drying permanent primer for paints, lubricating coatings, bonded coatings etc. It provides excellent corrosion protection especially in cases of cathodic corrosion.



Repairing of galvanized surfaces which have been damaged by welding, machining etc., Protection of all polished metal surfaces, Corrosion Protective Primer for paints, coatings etc., Cosmetic repairs in pipes, TV Towers, Hand Rails, Rims, Storage Tanks etc.


Ensure that the surface to be coated is clean, degreased and dry. (Use MOSIL SPRAY – 18 if necessary for cleaning and degreasing). Shake the container of SPRAY – 44e – N thoroughly (approx. 1 minute) and spray at a distance of 25 – 30 cm such that a thin uniform film is obtained. Allow the film to dry and ensure that the component is not touched which would leave a fingerprint mark etc.

After use invert the can and clear the nozzle by pressing the actuator for a period of 30 seconds.


  • Ready to use touch up spray for galvanized surfaces.
  • Resists rust and corrosion on any iron or steel surfaces.
  • Contains no Chromates or methylene chlorides which are injurious to health.
Appearance Grey Silverish
Specific Gravity 0.85 ± 0.1 (Bulk)
% Volatiles < 85%
Odour Mild
Copper Strip
Drying Time
(Touch Dry)
2 – 3 minutes
Drying Time
(Tack Free)
8 – 10 minutes
Drying Time
(Complete Dry)
12 – 24 hours
Purity of Zinc in
Finished Film
> 98%
Propellant Eco-friendly
Blend of Propane
& Butane
Contents 500ml when
Container Aerosol tin with
25mm valve and

PACKING: 500ml Eco-friendly Aerosol Spray

Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

    Follow us

    Get the Newsletter

      Sinetec Technologies
      Tel: 04222446162